📞 01482 483950 ✉ info@nafl.co.uk

Raised access floor recovery for reuse

Removing a raised access floor? Don’t skip it — talk to us first. NAFL may be able to inspect, lift, stack and remove suitable used floor panels so they can be refurbished and reused on future projects.

Tate Access Floors dealerSupply & installation
Northern England & ScotlandRegional coverage
Commercial to data centreAll project types
Sustainability optionsRMG600+ & reclaimed stock

Every panel in a skip is embodied carbon thrown away

Every raised access floor taken up and sent to a skip is embodied carbon thrown away. Steel-encased and calcium sulphate panels are built to last for decades, and many come out of a strip-out with plenty of life left in them.

As a Tate Access Floors approved dealer working across Northern England and Scotland, we supply and install reclaimed panels for refurbishments, extensions and repairs. We are always looking for good used stock — if you have a floor being removed, we would like to see it before it goes in a skip.

See where recovered panels end up →

Who this is for

  • Main contractors managing strip-out packages who want a lower-waste route and cleaner waste reporting
  • Fit-out contractors removing existing floors as part of a Cat A or Cat B scheme
  • Landlords and asset managers clearing floors at lease end, during dilapidations or ahead of a refurbishment
  • Strip-out and soft-strip contractors diverting material from landfill and reducing skip volumes

What we can do

Where a floor is suitable, our team can:

  • Inspect panels on site and assess type, condition, quantity and access
  • Lift panels carefully to avoid damage to edges, coverings and pedestals
  • Stack them on pallets, sorted by type and grade, ready for transport
  • Remove them from site as part of an agreed programme

We can work around your programme and coordinate with your site team on access, lifting and loading.

How it works

  1. Tell us about the floor. Send the location, approximate area, panel manufacturer or type (if known), floor finish and your strip-out dates. Photos help.
  2. We review it. We check whether the panels are likely to suit our reuse stock and whether a site visit is worthwhile.
  3. Site inspection. Where it looks promising, we inspect the floor and confirm which panels, if any, we can take.
  4. We confirm terms. You receive a clear written proposal setting out scope, programme and any costs or credits before work starts.
  5. Lift, stack and remove. Our team recovers the agreed panels on the agreed dates and provides confirmation of what has been taken for your records.

What we look for

Not every floor can be reused. Suitability depends on what we find on inspection. We generally look for:

  • Recognised manufacturer systems, with steel-encased and calcium sulphate panels most likely to suit
  • Panels that are flat, square and structurally sound, with intact edges and corners
  • Sensible quantities of a consistent panel type
  • Panels free from water damage, corrosion, heavy contamination or adhesive residue
  • Safe, practical access for lifting, stacking and loading
Honest about what we can’t take. Panels that do not meet our criteria will need to stay within your normal waste or recycling route. We will tell you early so it does not affect your programme.

Commercial terms

Every recovery is priced on its merits. Depending on panel type, condition, quantity, location and access, we may offer a credit, a no-charge collection or a quoted charge for labour and transport. We confirm this in writing after inspection, before any work starts — so there are no surprises on the day.

Why it matters

Lower embodied carbon

Reuse keeps manufactured panels in service instead of making new ones.

Less waste to landfill

Fewer skips, lower disposal costs and a better story for your waste reporting.

Supports project targets

Helps clients and landlords working towards BREEAM, ESG and circular economy commitments.

Up the waste hierarchy

Reuse sits above recycling, recovery and disposal.

Local reuse

Recovered panels go back into refurbishments and repairs across our region, not halfway across the country.

Frequently asked questions

The questions contractors, landlords and strip-out teams ask us most before getting in touch.

Will you take any raised access floor?
No. We can only take panels that are suitable for reuse after inspection. We will tell you clearly which panels we can take and which we cannot.
Is the service free?
Not always. Terms depend on the panels, quantity, location and access. We confirm costs or credits in writing before work starts.
Do you remove pedestals and stringers?
Where they are suitable and agreed in advance, yes. Tell us what is installed when you first get in touch.
How much notice do you need?
The earlier the better. Ideally contact us as soon as strip-out dates are known, so we can inspect and plan around your programme.
What areas do you cover?
Northern England and Scotland. For projects elsewhere, get in touch and we will let you know if we can help.
Will I get confirmation of what you took?
Yes. We provide a record of the panels removed for your waste and sustainability reporting.

Got a raised access floor coming out?

Let’s see if it can go back in. Send us the location, approximate area, panel type and strip-out dates, with a few photos if you have them, and we’ll tell you quickly whether a site inspection is worthwhile. Or email info@nafl.co.uk with “Floor recovery” in the subject line.