Hollow Floor 40B supplied and installed by NAFL
A higher-load hollow floor using a calcium sulphate panel with factory-bonded steel sheet, for shallow voids and enhanced loading.
Tate Access Floors dealerSupply & installation
Northern England & ScotlandRegional coverage
Commercial to data centreAll project types
Sustainability optionsRMG600+ & reclaimed stock
Hollow floor, steel-bonded
Product overview
Hollow Floor 40B is a higher-load hollow floor system using a calcium sulphate panel with factory bonded steel sheet. It is designed where shallow service voids and enhanced loading performance are required.
Typical applications
- High-load hollow floor applications and commercial spaces requiring shallow service voids
Technical summary
40.4mm panel thickness, calcium sulphate system panel, load class 6, working load 12.5kN.
Specification note. This page summarises the product for guidance and does not replace the official Tate datasheet or a consultant specification. Confirm final selection against project design, loading, void height, finish, fire and acoustic requirements and Tate documentation.
Considering Hollow Floor 40B for your project?
Send us your drawings, floor area, loading and programme and we will advise on practical next steps.